308711 v.2 Bachelor of Engineering (Electrical Power Engineering)
BEng(Curtin) OR BEng(Hons)(Curtin)
Course CRICOS Code: 052794G
Registered full-time Duration for International Onshore Students on student visas:
4 Years
Introduction
This course requires a minimum of eight semesters of full-time study. The first four semesters are studied in common with all students. In the fifth semester, students commence specialisation in Electrical Power Engineering. There is hardly any aspect of our modern civilisation that is not dependent upon electrical energy. We use this for heating, cooling, lighting, transportation, manufacturing and production, minerals processing to name just a few areas of application. Electrical power engineering considers these applications of electrical energy, together with its generation, transmission and distribution, as well as the harnessing of sources of renewable and sustainable energy.
Specific Requirements
For occupational health and safety reasons, it is a requirement for entry into this course, that students are able to identify the difference between various colours. STAT is not accpeted for mature age entry but may be used to demonstrate English Competence Requirements. Students are required to complete Senior First Aid training and provide evidence of it to the Faculty for graduation.
Note
In certain case, the need to undertake an additional program of preparatory studies may result in extension of studies beyond the regular four year term. Students with other, or equivalent qualification should direct enquiries to the Head of Department.
Recognition of Prior Learning
Applications for recognition of prior learning are assessed on an individual basis.
4 years' full-time study or part-time equivalent.
Course Organisation
Students undertake the Bachelor of Engineering Pre-Major in the first year and on successful completion, proceed to the second year of an engineering discipline. Please refer to the section at the front of the Department of First Year Engineering Studies to obtain details about the Bachelor of Engineering Pre-Major.
Professional Recognition
This course has been accorded full recognition by Engineers Australia. This exempts graduates from all academic requirements for Corporate Membership of Engineers Australia. To qualify for the grade of Corporate Member of Engineers Australia, a graduate also requires a minimum of four years of approved experience following the award of the Bachelor of Engineering degree. All degree courses are also recognised by various overseas professional institutions.Further information regarding membership of professional institutions can be obtained from the Faculty of Engineering and Computing or from the Secretary, Engineers Australia, Western Australia Division. To satisfy requirements, students must complete at least 12 weeks or equivalent of exposure to professional practice. This requirement can be met by appropriate work experience. Students must demonstrate that they have met these requirements by using a formal log book to record their professional experiences during this period of their degree study.
Career Opportunities
Graduates may expect to find employment with supply authorities, machine manufacturers and other large scale users of electrical energy, such as mining companies.
Additional Course Expenses
Students may be expected to purchase a number of textbooks, readers and other essential study materials.
Further Information
For more information about the program, contact the Career Consultant, in the Faculty of Science and Engineering on (08) 9266 4816, email careers@vesta.curtin.edu.au or visit our website www.scieng.curtin.edu.au.
Special Note
For details on the honours classes refer to the Curtin Policies website http://www.policies.curtin.edu.au/documents/honours_degrees_and_degrees_with_honours.doc
Combined Degree Information
Electrical Power Engineering may be combined with Computer Science, Physics.
Course Structure Disclaimer
Curtin University reserves the right to alter the internal composition of any course to ensure learning outcomes retain maximum relevance. Any changes to the internal composition of a course will protect the right of students to complete the course within the normal timeframe and will not result in additional cost to students through a requirement to undertake additional units.
| Course Structure | Hrs/Wk | Credit | |||
|---|---|---|---|---|---|
| Year 1 | |||||
| 307545 | v.1 | Bachelor of Engineering Pre-Major | 200.0 | ||
| 200.0 | |||||
| Year 2 Semester 1 | |||||
| 12706 | v.3 | Electrical Circuits 203 | 4.0 | 25.0 | |
| 12709 | v.2 | Mathematics 277 | 4.0 | 25.0 | |
| 308768 | v.1 | Foundations of Digital Design 201 | 5.0 | 25.0 | |
| 308775 | v.1 | Engineering Electromagnetics 201 | 3.0 | 12.5 | |
| 308789 | v.1 | Probability Theory 201 | 3.0 | 12.5 | |
| 100.0 | |||||
| Year 2 Semester 2 | |||||
| 12711 | v.4 | Electrical Systems 204 | 5.0 | 25.0 | |
| 12713 | v.3 | Embedded Software Engineering 204 | 3.0 | 12.5 | |
| 2894 | v.4 | Microcomputers 202 | 3.0 | 12.5 | |
| 308780 | v.1 | Signal and Systems 202 | 5.0 | 25.0 | |
| 308781 | v.1 | Electronic Fundamentals 202 | 5.0 | 25.0 | |
| 100.0 | |||||
| Year 3 Semester 1 | |||||
| 12831 | v.4 | Power System Analysis 301 | 5.0 | 25.0 | |
| 12855 | v.4 | Embedded Systems Engineering 301 | 4.0 | 25.0 | |
| 300786 | v.3 | Renewable Energy Principles 301 | 5.0 | 25.0 | |
| 308798 | v.1 | Control Systems 301 | 4.0 | 25.0 | |
| 100.0 | |||||
| Year 3 Semester 2 | |||||
| 11500 | v.3 | Electrical Machines 302 | 5.0 | 25.0 | |
| 12835 | v.3 | Power Electronics 304 | 5.0 | 25.0 | |
| 308784 | v.2 | Power System Protection 302 | 5.0 | 25.0 | |
| 310683 | v.1 | Engineering Management 302 | 4.0 | 25.0 | |
| 100.0 | |||||
| Year 4 Semester 1 | |||||
| 12838 | v.4 | Engineering Project 401 | 10.0 | 25.0 | |
| 307660 | v.4 | Engineering Sustainable Development 201 | 2.0 | 12.5 | |
| 307664 | v.1 | Engineering Law 202 | 2.0 | 12.5 | |
| 308785 | v.1 | Power Electronics and Drives 401 | 5.0 | 25.0 | |
| SELECT OPTIONAL UNITS TO THE TOTAL VALUE OF: | 25.0 | ||||
| 100.0 | |||||
| Year 4 Semester 2 | |||||
| 12844 | v.5 | Engineering Project 402 | 5.0 | 25.0 | |
| 301302 | v.4 | Electric Power Transmission and Distribution 402 | 3.0 | 25.0 | |
| 308787 | v.1 | Instrumentation and Control 402 | 5.0 | 25.0 | |
| SELECT OPTIONAL UNITS TO THE TOTAL VALUE OF: | 25.0 | ||||
| 100.0 | |||||
| Optional Units to Select from in Year 4 Semester 1 | Hrs/Wk | Credit | |||
| 12856 | v.3 | Microprocessors 401 | 4.0 | 25.0 | |
| 302915 | v.3 | Electrical Utility Engineering 404 | 2.5 | 25.0 | |
| Optional Units to Select from in Year 4 Semester 2 | Hrs/Wk | Credit | |||
| 12834 | v.4 | Digital Signal Processing 304 | 5.0 | 25.0 | |
| 12861 | v.4 | Renewable Energy Systems 402 | 5.0 | 25.0 | |
Availability
| Year | Location | Period | All* | Internal | Partially Online Internal^ | External | Fully Online# |
|---|---|---|---|---|---|---|---|
| 2010 | Bentley Campus | Semester 1 | Y | ||||
| 2010 | Bentley Campus | Semester 2 | Y | ||||
| 2010 | Miri Sarawak Campus | Semester 1 | Y | ||||
| 2010 | Miri Sarawak Campus | Semester 2 | Y |
The information displayed above refers to study periods and locations where the course is available for first time entry. Students are normally only offered or admitted to a course once.
*The course itself may not be available either solely internally or externally but individual units may be offered in either or both of those modes. Prospective students should contact the Course Coordinator for further information.
^Course and associated units are offered in this mode permitting International Onshore student enrolment.
#Course and associated units are offered in this online only mode and DO NOT permit International Onshore student enrolment.
Curtin University of Technology
To report errors on this website please use: Contact Us
Copyright and Disclaimer
Content Last Modified: April 21, 2010
Curtin University of Technology, Perth CRICOS Provider Code 00301J
The Sydney Campus of Curtin University of Technology CRICOS Provider Code 02637B