PRRE1002 (v.1) Plant Shutdown, Commissioning and Cathodic Protection
| Area: | Curtin Malaysia |
|---|---|
| Credits: | 12.5 |
| Contact Hours: | 8.0 |
| TUITION PATTERNS: | The tuition pattern provides details of the types of classes and their duration. This is to be used as a guide only. Precise information is included in the unit outline. |
| Other: | 4 x 2 Hours Weekly |
| Equivalent(s): |
310552 (v.1)
Plant Shutdown, Commissioning and Cathodic Protection 100
or any previous version
|
| UNIT REFERENCES, TEXTS, OUTCOMES AND ASSESSMENT DETAILS: | The most up-to-date information about unit references, texts and outcomes, will be provided in the unit outline. |
| Syllabus: | Plant shutdown: identify maintenance project and plant requirements; identify tasks, timelines and resources; develop a schedule; communicate with all relevant stakeholders and monitor shutdown. Monitor and maintain cathodic protection systems: prepareand organise operational and maintenance activities; monitor and adjust electrical equipment; conduct CP system surveys; recommission the system; analyse and utilise CP data; control hazards and respond to problems. Commission/recommission plant: contribute to the design of plant/equipment; take part in commission planning; participate in acceptance of plant equipment; commission system, evaluate results and identify modifications. Decommission plant: contribute to decommission planning; isolate and decontaminate equipment/units and inspect, test and notify completion of work. |
| Field of Education: | 030399 Process and Resources Engineering not elsewhere classified |
| Result Type: | Grade/Mark |
Availability
Availability Information has not been provided by the respective School or Area. Prospective students should contact the School or Area listed above for further information.
Disclaimer
Information in this publication is correct at the time of printing but may be subject to change.
In particular, the University reserves the right to change the content and/or method of assessment, to change or alter tuition fees of any unit of study, to withdraw any unit of study or program which it offers, to impose limitations on enrolment in any unit or program, and/ or to vary arrangements for any program.
This material does not purport to constitute legal or professional advice.
Curtin accepts no responsibility for and makes no representations, whether express or implied, as to the accuracy or reliability in any respect of any material in this publication.
Except to the extent mandated otherwise by legislation, Curtin University does not accept responsibility for the consequences of any reliance which may be placed on this material by any person.
Curtin will not be liable to you or to any other person for any loss or damage (including direct, consequential or economic loss or damage) however caused and whether by negligence or otherwise which may result directly or indirectly from the use of this publication.
International students
International students studying in Australia on a student visa can only study full-time and there are also specific entry requirements that must be met. As some information contained in this publication may not be applicable to international students, refer to international.curtin.edu.au for further information. Australian citizens, permanent residents and international students studying outside Australia may have the choice of full-time, part-time and external study, depending on course availability and in-country requirements.
