308874 (v.1) Geotechnical and Earthworks 367

Area:	Department of Civil Engineering
Credits:	25.0
Contact Hours:	5.5
The tuition pattern below provides details of the types of classes and their duration. This is to be used as a guide only. For more precise information please check your unit outline.
Lecture:	1 x 5 Hours Weekly
Laboratory:	3 x 2 Hours Once-only
Prerequisite(s):	7601 (v.2) Civil Engineering Analysis 262 or any previous version AND 308864 (v.1) Geotechnical Engineering 268 or any previous version
Syllabus:	Geomechanics. Soil compaction. Stresses and strain in soils, shear strength, shear strength of sand, shear strength of clay, critical state theory. Soil bearing capacity for shallow foundations. Ultimate soil-bearing capacity for shallow foundations, Terzaghi's ultimate bearing capacity equation, effect of groundwater table, factor of safety, general bearing capacity equation, foundations subjected to one or two-way eccentricity, plate load test - a field test, bearing capacity of foundations on slope, and bearing capacity of sand based on settlement. Earthmoving. Earthmoving plant types, earthwork volumes, mass haul diagrams, soil volume properties, grade and rolling resistances, assessment of earthmoving plant including track-type tractors, scrapers,hydraulic excavators and shovels, front end loaders, off highway trucks, compaction plant. Fleet production, optimisation techniques, queuing theory.
To ensure that the most up-to-date information about unit references, texts and outcomes appears, they will be provided in your unit outline prior to commencement.
Field of Education:	030911 Geotechnical Engineering
SOLT (Online) Definitions*:	Supplemental *Extent to which this unit or thesis utilises online information
Result Type:	Grade/Mark

Availability

Year	Location	Period	Internal	Partially Online Internal	Area External	Central External	Fully Online
2010	Bentley Campus	Semester 1	Y
2010	Miri Sarawak Campus	Semester 1	Y

Area External refers to external course/units run by the School or Department or offered by research.

Central External refers to external and online course/units run through the Curtin Bentley-based Distance Education Area

Partially Online Internal refers to some (a portion of) learning provided by interacting with or downloading pre-packaged material from the Internet but with regular and ongoing participation with a face-to-face component retained. Excludes partially online internal course/units run through the Curtin Bentley-based Distance Education Area which remain Central External

Fully Online refers to the main (larger portion of) mode of learning provided via Internet interaction (including the downloading of pre-packaged material on the Internet). Excludes online course/units run through the Curtin Bentley-based Distance Education Area which remain Central External