Courses Handbook 2010

312635 v.1 Bachelor of Engineering (Mechatronic Engineering)

BEng(Curtin) OR BEng(Hons)(Curtin)

Course CRICOS Code: 020856G
Registered full-time Duration for International Onshore Students on student visas: 4 Years


Introduction

Mechatronics is the title given to the subdiscipline of engineering which studies the integration of mechanical and electronic technologies to create 'intelligent' machines, systems and controllers. High levels of automation in manufacturing environments require designers with skills in the mechanical sciences since the machinery and robotic equipment utilised are fundamentally mechanical in nature. The actuation, monitoring and control of the mechanical devices are, however, achieved by electrical and electronic means. This course provides graduates with skills and knowledge in both mechanical and electrical technologies that will equip them for employment in manufacturing and related environments.

Course Entry Requirements/Prerequisites

TEE Applicable Mathematics plus at least two of TEE Calculus, Chemistry and Physics.

Specific Requirements

The STAT is not accepted for mature age entry but may be used to demonstrate English Competence requirements.

Recognition of Prior Learning

Applications for recognition of prior learning are assessed on an individual basis.

Duration and Availability

4 years' full-time study or equivalent part-time study.

Course Organisation

Students undertake the Bachelor of Engineering Pre-Major in the first year and on successful completion, proceed to the second year of an engineering discipline. Please refer to the section at the front of the Department of First Year Engineering Studies to obtain details about the Bachelor of Engineering Pre-Major.

Professional Recognition

The Bachelor of Engineering has been accorded full recognition by Engineers Australia and satisfies all the academic requirements for Corporate Membership. To qualify for the grade of Corporate Member of Engineers Australia, a graduate also requires a minimum of four years approved experience following the award of the Bachelor of Engineering degree. All degree courses are also recognised by various overseas professional institutions. Further information regarding membership of professional institutions can be obtained from the School of Engineering or from the Secretary, Engineers Australia, Western Australia Division.

Career Opportunities

A graduate in mechatronic engineering may find employment in the manufacturing or process industries, particularly where automation is being practiced. Organisations that employ only a few professional engineers will find the combined and diverse mechanical and electronic skills, which the mechatronics graduate will have, an advantage over the more focused traditional disciplines.

Additional Course Expenses

Students may be expected to purchase a number of textbooks, readers and other essential study materials.

Further Information

For more information contact the Career Consultant, in the Faculty of Science and Engineering on (08) 9266 4816, email careers@vesta.curtin.edu.au or visit our website www.scieng.curtin.edu.au.

Special Note

For details on the honours classes refer to the Curtin Policies website http://www.policies.curtin.edu.au/documents/honours_degrees_and_degrees_with_honours.doc

Course Structure Disclaimer

Curtin University reserves the right to alter the internal composition of any course to ensure learning outcomes retain maximum relevance. Any changes to the internal composition of a course will protect the right of students to complete the course within the normal timeframe and will not result in additional cost to students through a requirement to undertake additional units.

Course Structure Hrs/Wk Credit
Year 1
307545 v.1   Bachelor of Engineering Pre-Major 200.0
  200.0
Year 2 Semester 1
308768 v.1   Foundations of Digital Design 201 5.0 25.0
308805 v.1   Machine Dynamics 231 4.0 25.0
308808 v.1   Engineering Mathematics 233 3.0 12.5
308809 v.1   Engineering Graphics 232 4.0 12.5
308875 v.1   Programming 215 2.5 12.5
308879 v.1   Electrical Circuits 205 3.0 12.5
  100.0
Year 2 Semester 2
308781 v.1   Electronic Fundamentals 202 5.0 25.0
308822 v.1   Mechatronic Modelling 231 6.0 25.0
308823 v.1   Linear Systems Modelling 232 3.5 12.5
308824 v.1   Mechatronic Project 234 4.0 12.5
310683 v.1   Engineering Management 302 4.0 25.0
  100.0
Year 3 Semester 1
12855 v.4   Embedded Systems Engineering 301 4.0 25.0
308827 v.1   Mechatronic Automation 331 4.0 25.0
308828 v.1   Mechanical Design 321 3.0 25.0
308829 v.1   Automatic Control 321 5.5 25.0
  100.0
Year 3 Semester 2
12835 v.3   Power Electronics 304 5.0 25.0
307660 v.3   Engineering Sustainable Development 201 2.0 12.5
307664 v.1   Engineering Law 202 2.0 12.5
308825 v.1   Mechatronic Project 332 7.0 25.0
308826 v.1   Manufacturing for Mechatronics 332 4.0 25.0
  100.0
Year 4 Semester 1
11501 v.3   Mechatronic Project 491 8.0 25.0
12906 v.3   Mechatronic Systems Design 431 5.0 25.0
  SELECT OPTIONAL UNITS TO THE TOTAL VALUE OF:   50.0
  100.0
Year 4 Semester 2
308830 v.1   Mechatronic Project 493 8.0 37.5
310544 v.1   Professional Practice 434 3.0 12.5
  SELECT OPTIONAL UNITS TO THE TOTAL VALUE OF:   50.0
  100.0
Optional Units to Select from in Year 4 Semester 1 Hrs/Wk Credit
300786 v.3   Renewable Energy Principles 301 5.0 25.0
302863 v.1   Vibration 431 4.0 25.0
308785 v.1   Power Electronics and Drives 401 5.0 25.0
308794 v.1   Embedded Software Engineering 401 5.0 25.0
310545 v.1   Design Methodology 431 4.0 25.0
312200 v.1   Sustainable Energy Systems and Technologies 431 8.0 25.0
Optional Units to Select from in Year 4 Semester 2 Hrs/Wk Credit
12861 v.4   Renewable Energy Systems 402 5.0 25.0
12907 v.3   Design For Manufacturing 431 3.0 25.0
12911 v.2   Automatic Control 432 4.0 25.0
302866 v.1   Noise 432 5.0 25.0

Availability

Year Location Period All* Internal Partially Online Internal^ External Fully Online#
2010 Bentley Campus Semester 1   Y      
2010 Bentley Campus Semester 2   Y      

The information displayed above refers to study periods and locations where the course is available for first time entry. Students are normally only offered or admitted to a course once.

*The course itself may not be available either solely internally or externally but individual units may be offered in either or both of those modes. Prospective students should contact the Course Coordinator for further information.

^Course and associated units are offered in this mode permitting International Onshore student enrolment.

#Course and associated units are offered in this online only mode and DO NOT permit International Onshore student enrolment.



Curtin Search Curtin Site Index